如何預防空壓機油分芯燒毀？

油分芯是螺桿空壓機重要的配件之一，是把油和氣分離開，讓油回到空壓機內部循環，讓氣排出供給用戶使用。同時，油分芯也是易損的耗材，到期后就需要及時更換。

Oil core separation is one of the important accessories of screw air compressor, which separates oil and gas, so that the oil returns to the internal circulation of the air compressor, so that the gas is discharged for the use of users. At the same time, the oil separation core is also vulnerable consumables, which needs to be replaced in time after expiration.

在使用過程中，會遇到不同的故障問題，油分芯燒毀是其中一種。油分芯燒毀故障實際上是油分芯被點燃了，那么，預防空壓機油分芯燒毀的措施是什么?

In the process of use, there will be different fault problems, one of which is burning oil core. Oil core burning fault is actually the oil core is ignited, so, what are the measures to prevent air compressor oil core burning?

1、停用了一段時間的空壓機，或冬天氣溫低時，再次啟動機器前，往主機內部加入少量潤滑油，讓主機啟動時有潤滑油和冷卻。

1. When the air compressor has been stopped for a period of time, or when the temperature is low in winter, before starting the machine again, add a small amount of lubricating oil to the main engine, so that there is lubricating oil and cooling when the main engine starts.

2、日常運行中，注意空壓機的排氣溫度，一旦發現機器長時間排氣溫度過高運行時，找出高溫的原因并解決問題。讓空壓機在正常的排氣溫度

2. In daily operation, pay attention to the exhaust temperature of the air compressor. Once it is found that the exhaust temperature of the machine is too high for a long time, find out the cause of high temperature and solve the problem. Let the air compressor at normal exhaust temperature

下運行，避免機器長時間的高溫，引發油路系統故障從而導致火災的發生。

To avoid long-term high temperature of the machine, which will cause oil system failure and cause fire.

3、靜電釋放明火燒毀油分芯。檢測空壓機的接地是否正常、油氣桶是否與機器地線導通、安裝油分時注意觀察與石棉墊接觸的油氣桶平面是否有異物。例如生銹的平面、有涂過密封膠的平面，或者其他異物影響到與油分接地導通。

3. Electrostatic discharge and open fire destroy the oil core. Check whether the grounding of the air compressor is normal, whether the oil and gas drum is connected with the ground wire of the machine, and pay attention to observe whether there are foreign matters on the plane of the oil and gas drum contacting with the asbestos pad when installing the oil separator. For example, rusty surface, coated with sealant plane, or other foreign matters affect the connection with oil sub grounding.

4、檢查電控箱內有無纖維、泡沫或者其他易燃的材料，防止電控箱內各部件工作時產生的電弧引燃這些材料，從而引發火災燒毀機器。

4, check whether there is any fiber, foam or other inflammable materials in the electric control box, prevent the electric arc generated by the components in the electronic control box to ignite these materials, thus causing the fire to burn down the machine.

5、設計了溫控閥的空壓機出現高溫問題，應遵循根治問題的原則。溫控閥壞了該更換就更換，不要隨意短接溫控閥。

5. The air compressor designed with temperature control valve has high temperature problem, which should follow the principle of radical cure. If the temperature control valve is broken, it should be replaced. Do not short circuit the temperature control valve at will.

6、噴油回轉空壓機由于排氣溫度低，一般沒有積碳的問題，但作為循環油，應具有良好的抗氧化作用，以保證一定的壽命。對于噴油回轉式空壓機應該使用特殊油，或具有良好抗乳化的循環油?？寡趸瘎┰谝话愕膲嚎s機溫度下應具有足夠低的揮發性，使?jié)櫥捅３值綋Q油時間。

6. Because of the low exhaust temperature of oil injection rotary air compressor, generally there is no carbon deposition problem, but as a circulating oil, it should have good oxidation resistance to ensure a certain life. For oil injection rotary air compressor, special oil or circulating oil with good demulsification resistance should be used. Antioxidants should have enough low volatility at general compressor temperature to keep lubricating oil to oil change time.