山東制氮機廠家介紹溫度對于制氮機的影響有哪些？

制氮機作為一種食品加工等領域當中使用十分普遍的一種，想必大家對制氮機一定不陌生吧，那么你知道溫度對制氮機的影響都有那些呢?下面就讓山東制氮機廠家的小編為你介紹下。

Nitrogen machine as a kind of food processing and other fields in the use of a very common, I think you must be familiar with the nitrogen machine, then you know the impact of temperature on the nitrogen generator? Let's introduce it to you by the editor of the nitrogen machine manufacturer.

一、減少穿刺的機會;

1、 Reduce the chance of puncture;

車輛行駛時，輪胎溫度逐漸升高，橡膠材料會釋放出易燃的烯烴氣體。當充滿空氣的輪胎的溫度達到氣體的燃點時，烯屬氣體將自發點燃，這將導致輪胎爆裂。氮?dú)馐且环N惰性氣體，在惰性氣體氣氛中，烯烴氣體不會自燃，從而避免了爆胎的發生;

When the vehicle is running, the tire temperature gradually increases, and the rubber material will release flammable olefin gas. When the temperature of the air filled tire reaches the ignition point of the gas, the olefin gas will ignite spontaneously, which will lead to tire burst. Nitrogen is an inert gas. In inert gas atmosphere, olefin gas will not spontaneous combustion, thus avoiding the occurrence of tire burst;

二、延長輪胎和相關部件的使用壽命;

2、 Extend the service life of tires and related components;

當溫度升高時，空氣中含有的氧氣、濕氣、油和其他物質很容易與車輪上的金屬部件或橡膠部件發生反應，導致金屬部件開裂和生銹以及橡膠部件老化。由于氮?dú)馐且环N惰性氣體，避免了與空氣中的這些物質發生不利的化學反應。輪胎熱膨脹較小，整體輪胎組合更加穩定。據統計，充氮?dú)廨喬サ氖褂脡勖瘸鋲嚎s空氣輪胎高26%;

When the temperature rises, the oxygen, moisture, oil and other substances in the air are easy to react with the metal parts or rubber parts on the wheel, resulting in cracking and rusting of the metal parts and aging of the rubber parts. As nitrogen is an inert gas, adverse chemical reactions with these substances in the air are avoided. The thermal expansion of tire is smaller, and the overall tire combination is more stable. According to statistics, the service life of nitrogen filled tire is 26% higher than that of compressed air tire;

三、節省燃料;

3、 Saving fuel;

充氮輪胎的摩擦系數較小，與地面的摩擦減小，因此可以提率，降低燃油成本(節省10%);

The friction coefficient of nitrogen filled tire is smaller and the friction with the ground is reduced, so it can improve the efficiency and reduce the fuel cost (save 10%);

四、降低輪胎漏氣概率，穩定行走性能;

4、 Reduce the tire air leakage probability and stabilize the walking performance;

橡膠中的氮分子比氧分子大，因此充氮輪胎的漏氣量少，與充入壓縮空氣的輪胎相比，可延長使用時間30% ~ 40%，且不會產生爆胎壓力。同時，充氮輪胎可以抑制局部磨損，使方向盤穩定。

The nitrogen molecule in rubber is larger than oxygen molecule, so the leakage of nitrogen filled tire is less. Compared with the tire filled with compressed air, the service life of nitrogen filled tire can be prolonged by 30% - 40%, and the tire burst pressure will not be produced. At the same time, nitrogen filled tire can restrain local wear and stabilize the steering wheel.

以上就是針對于山東制氮機在溫度上影響的內容介紹，那么本文到這里也就結束了，感謝大家的閱讀!

The above is for the Shandong nitrogen machine in the temperature of the content of the introduction, then this article is over here, thank you for reading!