影響制氮機穩定性的因素有哪些？

制氮機是按變壓吸附技術設計、制造的氮氣制取設備。那么您了解決定制氮機穩定性的因素有哪些嗎？接下來山東制氮機設備廠家的小編整理了相關因素，大家可以看一下。

Nitrogen generator is designed and manufactured according to PSA technology. Do you know the factors that affect the stability of customized nitrogen machine? Next, Shandong nitrogen machine equipment manufacturers collated the relevant factors, you can have a look.

從制氮機的組成來看，影響其穩定因素主要只有兩個方面，控制閥和碳分子篩。

From the composition of nitrogen generator, there are only two main factors affecting its stability, control valve and carbon molecular sieve.

PSA制氮機應具有的性能：

PSA nitrogen generator should have the following performance:

a.材質優良、密封性好，不能漏氣

a. Excellent material, good sealing, no air leakage

b.能夠接受頻繁開、關的動作，保證使用壽命

b. Can accept frequent opening and closing actions to ensure service life

c.接收控制信號內快速完成開關動作（約0.02秒）

c. Quickly complete switch action within receiving control signal (about 0.02 seconds)

閥門周期（每隔60秒）須開關一次，制氮機每年300個工作日計算，每天24小時連續動行，吸附與解吸周期為4分鐘計，那么每只閥門每年需要開、關20多萬次。

The valve cycle (every 60 seconds) must be opened and closed once. If the nitrogen generator operates continuously 24 hours a day for 300 working days a year, and the adsorption and desorption cycle is 4 minutes, then each valve needs to be opened and closed more than 200000 times a year.

而只要其中一只閥門出現故障都會影響整臺設備正常。所以閥門連續使用壽命是制氮機穩定可靠的重要一環節。

As long as one of the valves fails, it will affect the normal operation of the whole equipment. Therefore, the continuous service life of the valve is an important part of the stability and reliability of the nitrogen generator.