空壓機維修中縮短檢修時間的技術方法

我們在空壓機的使用中，隨著時間的推移，空壓機都會出現一些故障，那么在空壓機維修中有沒有快讀檢修的方法呢？今天就給您介紹幾個：

We in the use of air compressor, as time goes on, air compressor will appear some faults, so in the air compressor maintenance there is no quick read maintenance method? Today, I'd like to introduce some of them to you

一、應用網絡技術安排修理計劃，找出關鍵路線，并加以調整優化

1、 Apply network technology to arrange repair plan, find out the key route, and adjust and optimize it

網絡技術又稱關鍵線路法，是一種計劃管理方法。它是通過分析項目過程中哪個活動序列進度安排的總時差少來預測項目工期。它用網絡圖表示各項工作之間的相互關系，找出控制工期的關鍵路線，以達到縮短工期、提供工效、降低成本的目的。

Network technology, also known as critical path method, is a plan management method. It predicts the project duration by analyzing which activity sequence has the least total time difference. In order to shorten the construction period, provide work efficiency and reduce the cost, the network diagram is used to show the relationship between various works and find out the key route to control the construction period.

山東空壓機

二、采用同步修理法

2、 Adopt synchronous repair method

將設備中易損件的使用壽命設備成按近，做到同次修理、同次更換。將生產過程中工藝上相互聯系的若干臺設備，安排在統一時間修理。

The service life of the vulnerable parts in the equipment should be close to that of the equipment, so that they can be repaired and replaced at the same time. Several equipments which are related to each other in the production process are arranged to be repaired at the same time.

三、采用分步修理法

3、 Step by step repair method is adopted

有計劃地分幾次修理設備各相對獨立部分，每次只修一部分、可利用節假日進行修理。

The equipment can be repaired several times in a planned way, and each part is relatively independent. Only one part of the equipment can be repaired each time.

四、采用冗余技術，包括采用備機、備用部件替換修理法

4、 Redundancy technology is adopted, including replacement and repair of spare machine and spare parts

這種方法又稱儲備技術，有時也稱容災備份技術，它是利用系統的并聯模型來提高系統可靠性的一種手段。

This method is also called reserve technology, sometimes called disaster recovery and backup technology. It is a means to improve the reliability of the system by using the parallel model of the system.

五、采用無維修設計或易維修設計

5、 Adopt no maintenance design or easy maintenance design

無維修設計是一種理想設計，即考慮維修達到“無停機時間”、“無維修費用”的可能性，以設計出不需要維修的設備。它要求從設計開始就要造成設備維修的原因，對于維修費用很高的設備尤為適用。

Maintenance free design is an ideal design, that is, considering the possibility of maintenance to achieve "no downtime" and "no maintenance cost", to design equipment that does not need maintenance. It requires that the causes of equipment maintenance should be eliminated from the beginning of design, especially for equipment with high maintenance cost.