如何確定干燥機是否正常工作？

在干燥技術高速發展的當今社會中，干燥機用戶在運行過程中通常都在追求快速的干燥效果，很難避免機器出現問題，即使產品質量非常好，也無法避免問題。

In today's society with the rapid development of drying technology, dryer users are usually in the pursuit of fast and efficient drying effect in the process of operation, it is difficult to avoid machine problems, even if the product quality is very good, it is also impossible to avoid problems.

因此這需要干燥設備的操作人員和維護技術人員進行快速維修和保養，那么如何快速確定污泥干燥機是否正常工作呢？下面由山東干燥機的小編來為大家講解一下：

Therefore, it needs the drying equipment operators and maintenance technicians to carry out rapid repair and maintenance, so how to quickly determine whether the sludge dryer is working properly? The following is explained by the editor of Shandong dryer:

干燥機在日常工作中，若出現異常故障，需要立即檢查干燥機各連接部位是否正常。各接頭密封面是否有泄漏，油水是否有異?，F(xiàn)象，有無電機發熱異常等情況。

In the daily work of the sludge dryer, if there is any abnormal fault, it is necessary to immediately check whether the connection parts of the dryer are normal. Whether there is leakage on the sealing surface of each joint, whether there is abnormal oil and water, whether there is abnormal motor heating, etc.

有時干燥機的雜音也會給我們帶來不好的信息，這時我們將認真聽取干燥機轉動的聲音是否正常；干燥機工作車間氣味刺鼻，仔細聞氣油味，用手摸一下干燥機的部件和電機的溫度是否正常，同時確定干燥機的整體連接情況和振動情況。

Sometimes the noise of the dryer will also bring us bad information. At this time, we will listen carefully to whether the sound of the dryer is normal; the smell of the dryer workshop is pungent, smell the smell of gas and oil carefully, touch the temperature of the parts and motor of the dryer by hand, and determine the overall connection and vibration of the dryer.

由此可見，了解干燥機的操作和維護是關重要的，以免影響生產，造成經濟損失。如果您對我們的干燥機有任何疑問，歡迎您的咨詢！

Therefore, it is very important to understand the operation and maintenance of sludge dryer, so as not to affect production and cause economic losses. If you have any questions about our sludge dryer, you are welcome to consult!